Ingram Mac10

Ingram Mac10

Ingram Model 10 is blowback-operated, selective-fire submachine gun, that fires from open bolt. The bolt has firing pin milled in its body (or pinned to it). Bolt is of telescoped design, with most of its weight located in front of the breech face, around the barrel. Cocking handle is located at the top fo the gun, and can be used to lock the bolt in forward position, when handle is turned sideways by 90 degrees. The receiver is made from formed sheet steel and consist of two parts - upper and lower. Receiver parts are connected by steel pin at the front of the weapon. Charging handle is located at the top of the receiver and doesn't move with the bolt when firing. The muzzle of the barrel is threaded to accept silencer. Controls include a manual safety, made in the form of a slider located inside the trigger guard, and a separate fire mode selector, made in form of a rotary lever located on left side of weapon, above the front of trigger guard. The shoulder stock was of telescoped design with folding shoulder rest made of steel wire. To provide additional stability, a leather loop attached to the front of the receiver, which is used to hold the gun by non-firing hand.

Sights are f most simple type, and include non-adjustable diopter type rear and protected front blade.

Calibers 9mm, .45 ACP. .380 ACP

Škorpion vz. 61

Škorpion vz. 61

The Škorpion is a select-fire, straight blowback-operated weapon that fires from the closed bolt position. The cartridge used produces a very low recoil impulse and this enables simple unlocked blowback operation to be employed; there is no delay mechanism and the cartridge is supported only by the inertia of the bolt and the strength of the return springs. When fired, gas pressure drives the case back in the chamber against the resistance provided by the weight of the bolt and its two recoil springs. The bolt travels back, extracting the empty case which is then ejected straight upwards through a port in the receiver housing top cover.

Chambered in.32acp, 9mm, 9mm makarov and .380 acp.

Glock family

Glock family

The Glock pistol, sometimes referred to by the manufacturer as Glock "Safe Action" Pistol, is a series of semi-automatic pistols designed and produced by Glock Ges.m.b.H., located in Deutsch-Wagram, Austria. The company's founder, engineer Gaston Glock, had no experience with firearm design or manufacture at the time their first pistol, the Glock 17, was being prototyped. Glock did, however, have extensive experience in advanced synthetic polymers, knowledge of which was instrumental in the company's design of the first successful line of pistols with a polymer frame. Glock introduced ferritic nitrocarburizing into the firearms industry as an anti-corrosion surface treatment for metal gun parts

Calibers:
9×19mm Parabellum
10mm Auto
.45 ACP
.40 S&W
.380 ACP
.357 SIG
.45 GAP

Glock 17 9mm

Glock 22 .40 S&W

Glock 20 10mm

Glock 37 45GAP